EP000 Ensign Soil Pipe 50mm x 3M
Code article : 156363
Description
The Ensign Soil pipe will give you a high quality product that will perform during installation and through the life of the building. The pipes are manufactured through a special process called the De Lavaud process, which gives greater impact and crush resistance, but also a surface hardness which is easy to cut. The coatings, fire and acoustic performance of the pipes and the total system will give you and the building occupants the peace of mind that the best system has been installed.
Product variants
| Article | DN | dn | Angle | Length | Height | Width | Weight |
|---|---|---|---|---|---|---|---|
| 156363 | 50 | - | - | 3000 | 58 | 58 | 12.5 |
| 156455 | 70 | - | - | 3000 | 78 | 78 | 17 |
| 156563 | 100 | - | - | 3000 | 110 | 110 | 24.4 |
| 156736 | 125 | - | - | 3000 | 135 | 135 | 34.3 |
| 156827 | 150 | - | - | 3000 | 160 | 160 | 41 |
| 156951 | 200 | - | - | 3000 | 210 | 210 | 67.6 |
| 157049 | 250 | - | - | 3000 | 274 | 274 | 97.5 |
| 157114 | 300 | - | - | 3000 | 326 | 326 | 127.1 |
| 157171 | 400 | - | - | 3000 | 429 | 429 | 179.5 |
| 157187 | 500 | - | - | 3000 | 532 | 532 | 247.6 |
| 157203 | 600 | - | - | 3000 | 635 | 635 | 325.5 |
All dimensions are in mm and nominal weights are in kg
Technical infos & product description
Product description
The Ensign Soil pipe will give you a high quality product that will perform during installation and through the life of the building. The pipes are manufactured through a special process called the De Lavaud process, which gives greater impact and crush resistance, but also a surface hardness which is easy to cut. The coatings, fire and acoustic performance of the pipes and the total system will give you and the building occupants the peace of mind that the best system has been installed.
Recommended use :
- Domestic use
- Fat Wastewater
- Hot effluents
- Hydrocarbon Wastewater
- Rainwater
- Runoff water
- Industrial Wastewater
Major benefits :
Pipes coated internally with a two part epoxy and externally with a red protective coating.
Technical infos
- Hot water resistance: 24h at 95°C.
- Thermal cycle resistance: 1500 cycles between 15°C and 93°C.
- Chemical resistance for 2 ≤ pH ≤ 12.
- Salt spray resistance: more than 1500 h
Coating description
- External coating: Red-brown, anti-corrosive acrylic primer paint, average dry film thickness 40 μm.
- Internal coating: Two-component ochre colored epoxy coating, average dry film thickness of 130 μm.
- Material : Cast Iron
- Industry product standards : BS EN 877
- Range Fire Classification :
Euroclass A1
- Percentage of Recycled Content : 99%
- Recycling Information : Fully recyclable
