1. Products
  2. Bends
  3. Short Radius Bend 22° - DN 75 - SMU S

Short Radius Bend 22° - DN 75 - SMU S

Code article : 156480

Description

Bend short radius 22° DN75 - SMU S allow a change of direction of the conveyed fluid, while maintaining quality and reliability, thanks to the cataphoretically deposited epoxy film used as a coating.Solid and durable, the quality of the coatings on our SMU-S pipes has remarkable intrinsic flame and fire protection properties. By their material and design, our SMU S pipes have exceptional acoustic performance, well above regulatory requirements. totally and indefinitely recyclable at the end of their life, without loss of property, our SMU-S pipes perfectly illustrate the virtues of a circular economy.

Product variants Technical infos BIM

Product variants

Article DN dn Angle Length Height Width Weight
156480 75 - 22 97 105 83 0.8

All dimensions are in mm and nominal weights are in kg

Technical infos & product description

Product description

Bend short radius 22° DN75 - SMU S allow a change of direction of the conveyed fluid, while maintaining quality and reliability, thanks to the cataphoretically deposited epoxy film used as a coating.Solid and durable, the quality of the coatings on our SMU-S pipes has remarkable intrinsic flame and fire protection properties. By their material and design, our SMU S pipes have exceptional acoustic performance, well above regulatory requirements. totally and indefinitely recyclable at the end of their life, without loss of property, our SMU-S pipes perfectly illustrate the virtues of a circular economy.

Recommended use :

  • Rainwater
  • Domestic use
  • Valve water
  • Wastewater
  • High pressure

Major benefits :

Solide et pérenne, la qualité des revêtements de nos coudes SMU S assurent une tranquillité d’exploitation La gamme SMU S est classé A1 selon le classement européen des Euroclasses et présente des propriétés intrinsèques pare-flammes et coupe-feu remarquables. Par leur matériau et leur conception, nos coudes SMU S ont des performances acoustiques exceptionnelles, bien supérieures aux exigences réglementaires.Totalement et indéfiniment recyclable en fin de vie, sans perte de propriété, nos coudes SMU S illustrent parfaitement les vertus d’une économie circulaire.

Technical infos

  • Hot water resistance: 24h at 95°C.
  • Thermal cycle resistance: 1500 cycles between 15°C and 93°C.
  • Chemical resistance for 2 ≤ pH ≤ 12.
  • Salt spray resistance internal coating: more than 350 h

Coating description

Coating: grey RAL 7015, epoxy, average dry film thickness 300 μm.
  • Industry product standards : BS EN 877, CE, NF
  • Range Fire Classification :
    Euroclass A1
  • Acoustic Performance : ESA 5
  • Percentage of Recycled Content : 99%
  • Recycling Information : Cast iron is fully recyclable through the existing recycling industrial network.
    Data source: Environmental Product Declaration S-P-02013

BIM

See our BIM Library