Moulded Bracket RW Classical Rise and Fall Galvanised 125mm x 100mm
Code article : 230033
Description
Classical Rainwater Moulded Rise and Fall Bracket Galvanised 125mm x 100mm. Classical moulded gutter galvanised mild steel rise and fall brackets are part of a complete system that is attached to a roof of a house or building that collects and directs rainwater away from the roof and eaves into a vertical pipe discharge system.
Product variants
| Article | DN | dn | Angle | Length | Height | Width | Weight |
|---|---|---|---|---|---|---|---|
| 240305 | 100 | - | - | - | - | - | 0.4 |
| 230033 | 125 | - | - | - | - | - | 0.4 |
| 248203 | 150 | - | - | - | - | - | 0.4 |
All dimensions are in mm and nominal weights are in kg
Technical infos & product description
Product description
Classical Rainwater Moulded Rise and Fall Bracket Galvanised 125mm x 100mm. Classical moulded gutter galvanised mild steel rise and fall brackets are part of a complete system that is attached to a roof of a house or building that collects and directs rainwater away from the roof and eaves into a vertical pipe discharge system.
Recommended use :
- Rainwater
- Runoff water
Major benefits :
The galvanised mild steel moulded rise and fall brackets support the weight of the moulded gutter system horizontally by inserting the spike into the building brickwork. Used when the building has no fascia board fixing. Guidance, 1 bracket every 900mm maximum with additional brackets to support fittings.
Coating description
- Coating: Black water based primer to an average thickness of 70 microns.
- Material : Galvanized steel
- Industry product standards : BS 460
- Percentage of Recycled Content : 97%
- Recycling Information : Fully recyclable
