TD09 Bend Timesaver Drain Medium Radius Access Side 150mm x 87.5°
Code article : 191241
Description
This range of medium radius bends come in a range of sizes and angles and used on there own or with other bends will enable you to move your pipe system around your project. These bends also have a access point.
Product variants
| Article | DN | dn | Angle | Length | Height | Width | Weight |
|---|---|---|---|---|---|---|---|
| 191239 | 100 | - | - | - | - | - | 13.1 |
| 191241 | 150 | - | - | - | - | - | 20.5 |
| 191243 | 225 | - | - | - | - | - | 57.5 |
All dimensions are in mm and nominal weights are in kg
Technical infos & product description
Product description
This range of medium radius bends come in a range of sizes and angles and used on there own or with other bends will enable you to move your pipe system around your project. These bends also have a access point.
Recommended use :
- Domestic use
- Fat Wastewater
- Aggressive effluents
- Hot effluents
- Hydrocarbon Wastewater
- Industrial Wastewater
- Rainwater
- Runoff water
Major benefits :
The Timesaver Drain cast iron medium radius bends allow a change of direction of the transported fluid. An opening is provided on the side protected by a door to allow access to the system to clear any debris or blockage.
Technical infos
- Hot water resistance: 24h at 95°C
- Thermal cycle resistance: 1500 cycles between 15°C and 93°C
Coating description
- Coating: Black Water Based Primer to an average thickness of 70microns.
- Material : Cast Iron
- Industry product standards : BS 437
- Range Fire Classification :
Euroclass A2-s1,d0
- Percentage of Recycled Content : 99%
- Recycling Information : Fully recyclable
