TD17 Inspection Chamber Timesaver Drain Double Arm 225mm x 225mm
Code article : 191317
Description
The Timesaver drain cast iron inspection chambers facilitate access to the pipe system for rodding and clearing debris.
Product variants
| Article | DN | dn | Angle | Length | Height | Width | Weight |
|---|---|---|---|---|---|---|---|
| 191312 | 100 | - | - | - | - | - | 40.2 |
| 191313 | 150 | - | - | - | - | - | 55.9 |
| 191314 | 150 | - | - | - | - | - | 87.2 |
| 191315 | 225 | - | - | - | - | - | 21 |
| 191316 | 225 | - | - | - | - | - | 22 |
| 191317 | 225 | - | - | - | - | - | 24 |
All dimensions are in mm and nominal weights are in kg
Technical infos & product description
Product description
The Timesaver drain cast iron inspection chambers facilitate access to the pipe system for rodding and clearing debris.
Recommended use :
- Domestic use
- Fat Wastewater
- Aggressive effluents
- Hot effluents
- Hydrocarbon Wastewater
- Industrial Wastewater
- Rainwater
- Runoff water
Major benefits :
The four branch arm entries are both at 45° conforming to BS EN 12056 part 4, and the body is fitted with a rectangular cast iron inspection lid and gasket seal to prevent odours escaping into the atmosphere. Where other angles of entry are necessary these can be achieved by the use of standard bends.
Technical infos
- Hot water resistance: 24h at 95°C
- Thermal cycle resistance: 1500 cycles between 15°C and 93°C
Coating description
- Coating: Black Water Based Primer to an average thickness of 70microns.
- Material : Cast Iron
- Industry product standards : BS 437
- Range Fire Classification :
Euroclass A1
- Percentage of Recycled Content : 97%
- Recycling Information : Fully recyclable
