Manifold Multi-Waste Connector - DN100 - PAM GLOBAL S
Code article : 261138
Description
The Ensign cast iron multi-connectors, save space by grouping waste pipes from various sources. The space is saved by allowing the grouping of evacuations of small diameter pipework from various devices such as sinks, basins, bidets, urinals or showers on two a single point.
Product variants
| Article | DN | dn | Angle | Length | Height | Width | Weight |
|---|---|---|---|---|---|---|---|
| 261138 | 100 | - | - | 445 | 582 | 445 | 12.8 |
All dimensions are in mm and nominal weights are in kg
Technical infos & product description
Product description
The Ensign cast iron multi-connectors, save space by grouping waste pipes from various sources. The space is saved by allowing the grouping of evacuations of small diameter pipework from various devices such as sinks, basins, bidets, urinals or showers on two a single point.
Recommended use :
- Domestic use
- Fat Wastewater
- Hot effluents
- Hydrocarbon Wastewater
- Rainwater
- Runoff water
- Industrial Wastewater
Major benefits :
The multi-connector allows the horizontal connection of up to six waste pipes - 3 either side, therefore can be used on soil stacks that service two back to back flats/apartments. The horizontal connections mean the waste pipes can be installed below the floor level to maximise space saving. The manifold contains and internal baffle allowing the use of all 6 waste inlets eliminating any cross flow. The manifold is supplied with 5 blanking plugs. Extended spigot capable of penetrating a floor slab depth of up to 400mm that eliminates the need for a joint in the slab. The spigot has 10mm increment markers to assist reducing the overall length to suit smaller slab depths
Technical infos
- Hot water resistance: 24h at 95°C.
- Thermal cycle resistance: 1500 cycles between 15°C and 93°C.
- Chemical resistance for 2 ≤ pH ≤ 12.
- Salt spray resistance internal coating: more than 1500 h
Coating description
Coating: red-brown, anti-corrosive cataphoresis epoxy, average dry film thickness 70 μm.
- Material : Cast Iron
- Industry product standards : BS EN 877
- Range Fire Classification :
Euroclass A1
- Percentage of Recycled Content : 97%
- Recycling Information : Cast iron is fully recyclable through the existing recycling industrial network.
Data source: Environmental Product Declaration S-P-02013
