ED07R Branch Ensign Drain Single with Rear Access 100mm x 100mm x 88°
Code article : 191793
Description
Ensign drain cast iron single branch with a swept radius to maximise the lateral discharge flow in accordance with design guidelines BS EN 12056 part 2.
Product variants
| Article | DN | dn | Angle | Length | Height | Width | Weight |
|---|---|---|---|---|---|---|---|
| 191793 | 100 | 100 | 88 | 205 | 270 | 110 | 4.3 |
| 191794 | 150 | 100 | 88 | 282 | 300 | 160 | 10.4 |
| 191795 | 150 | 150 | 88 | 340 | 400 | 160 | 13.9 |
All dimensions are in mm and nominal weights are in kg
Technical infos & product description
Product description
Ensign drain cast iron single branch with a swept radius to maximise the lateral discharge flow in accordance with design guidelines BS EN 12056 part 2.
Recommended use :
- Aggressive effluents
- Domestic use
- Fat Wastewater
- Hot effluents
- Industrial Wastewater
- Rainwater
- Runoff water
- Wastewater
- High pressure
Major benefits :
An opening is provided protected by a door to allow access to the system to clear any debris or blockage.
Technical infos
- Hot water resistance: 24h at 95°C
- Thermal cycle resistance: 1500 cycles between 15°C and 93°C
- Chemical resistance for 1 ≤ pH ≤ 13, up to 80°C
- Salt spray resistance internal coating : more than 1500h
- Salt spray resistance external coating : more than 1500h
Coating description
- External coating: Powder Epoxy Resin average dry film thickness 150 microns
- Internal coating: Powder Epoxy Resin average dry film thickness 150 microns
- Material : Cast Iron
- Industry product standards : BS EN 877
- Range Fire Classification :
Euroclass A2-s1,d0
- Percentage of Recycled Content : 97%
- Recycling Information : Virtually 100% Recyclable
