ED074 Blank End Ensign Drain Expansion Plug 100mm
Code article : 191823
Description
The Ensign drain expansion plugs are used to temporarily or permanently seal the pipes and fittings located inside the aperture, used on gravity drainage networks.
Product variants
| Article | DN | dn | Angle | Length | Height | Width | Weight |
|---|---|---|---|---|---|---|---|
| 191823 | 100 | - | - | 118 | 77 | 118 | 1.2 |
| 191824 | 150 | - | - | 168 | 73 | 168 | 2.4 |
All dimensions are in mm and nominal weights are in kg
Technical infos & product description
Product description
The Ensign drain expansion plugs are used to temporarily or permanently seal the pipes and fittings located inside the aperture, used on gravity drainage networks.
Recommended use :
- Aggressive effluents
- Domestic use
- Fat wastewater
- Hot effluents
- Industrial wastewater
- Rainwater
- Runoff water
- High pressure
- Wastewater
Major benefits :
The resistance to accidental pressure of the expanding plug is 0.2 bar without additional device.
Technical infos
- Hot water resistance: 24h at 95°C
- Thermal cycle resistance: 1500 cycles between 15°C and 93°C
- Chemical resistance for 1 ≤ pH ≤ 13, up to 80°C
- Salt spray resistance internal coating : more than 1500h
- Salt spray resistance external coating : more than 1500h
Coating description
- External coating: Powder Epoxy Resin average dry film thickness 70 microns
- Internal coating: Powder Epoxy Resin average dry film thickness 70 microns
- Material : Cast Iron
- Industry product standards : BS EN 877
- Range Fire Classification :
Euroclass A2-s1,d0
- Percentage of Recycled Content : 97%
- Recycling Information : Virtually 100% Recyclable
