ED071 Blank End Ensign Drain Push-fit Connector 50mm x 150mm
Code article : 191822
Description
This Ensign drain cast iron blank end also has a feature to allow for a push-fit waste pipe connection.
Product variants
| Article | DN | dn | Angle | Length | Height | Width | Weight |
|---|---|---|---|---|---|---|---|
| 191821 | 100 | - | - | - | - | - | 1 |
| 191822 | 150 | - | - | - | - | - | 2 |
All dimensions are in mm and nominal weights are in kg
Technical infos & product description
Product description
This Ensign drain cast iron blank end also has a feature to allow for a push-fit waste pipe connection.
Recommended use :
- Aggressive effluents
- Domestic use
- Fat Wastewater
- Hot effluents
- Industrial Wastewater
- Rainwater
- Runoff water
Major benefits :
Push -fit rubber grommets for 54/56mm OD waste pipework
Technical infos
- Hot water resistance: 24h at 95°C
- Thermal cycle resistance: 1500 cycles between 15°C and 93°C
- Chemical resistance for 1 ≤ pH ≤ 13, up to 80°C
- Salt spray resistance internal coating : more than 1500h
- Salt spray resistance external coating : more than 1500h
Coating description
- External coating: Powder Epoxy Resin average dry film thickness 150 microns
- Internal coating: Powder Epoxy Resin average dry film thickness 150 microns
- Material : Cast Iron
- Industry product standards : BS EN 877
- Range Fire Classification :
Euroclass A2-s1,d0
- Percentage of Recycled Content : 97%
- Recycling Information : Virtually 100% Recyclable
