1. Products
  2. Special fittings
  3. Special compensator long - DN125 - SMU S

Special compensator long - DN125 - SMU S

Code article : 155068

Description

The special compensators long of the SMU S range are accessories designed to absorb relative movements between the pipe elements fixed at each end. Conditions of use : The motion compensator must be connected to the network with claw joints and clamps (≤ DN200) or self-stopping HP joint (≥ DN300). All these configurations require the use of bidirectional anchor fittings. During installation the compensator must be fixed with a distance between its ends which must be equal to the installation L value with X = Y = Z = 0

Product variants Technical infos BIM

Product variants

Article DN dn Angle Length Height Width Weight
155068 125 - - 1796 275 135 33

All dimensions are in mm and nominal weights are in kg

Technical infos & product description

Product description

The special compensators long of the SMU S range are accessories designed to absorb relative movements between the pipe elements fixed at each end. Conditions of use : The motion compensator must be connected to the network with claw joints and clamps (≤ DN200) or self-stopping HP joint (≥ DN300). All these configurations require the use of bidirectional anchor fittings. During installation the compensator must be fixed with a distance between its ends which must be equal to the installation L value with X = Y = Z = 0

Recommended use :

  • Rainwater
  • Domestic use
  • Valve water

Major benefits :

Solide et pérenne, la qualité des revêtements des compensateurs de mouvement à grand débattement SMU S assurent une tranquillité d’exploitation.La gamme SMU S est classé A1 selon le classement européen des Euroclasses et présente des propriétés intrinsèques pare-flammes et coupe-feu remarquables. Par leur matériau et leur conception, les compensateurs de mouvement à grand débattement SMU S ont des performances acoustiques exceptionnelles, bien supérieures aux exigences réglementaires.Totalement et indéfiniment recyclable en fin de vie, sans perte de propriété, les compensateurs de mouvement à grand débattement SMU S illustrent parfaitement les vertus d’une économie circulaire.

Technical infos

  • Hot water resistance: 24h at 95°C.
  • Thermal cycle resistance: 1500 cycles between 15°C and 93°C.
  • Chemical resistance for 2 ≤ pH ≤ 12.
  • Salt spray resistance internal coating: more than 350 h

Coating description

Coating: red-brown, anti-corrosive cataphoresis epoxy, average dry film thickness 70 μm.
  • Industry product standards : BS EN 877, CE, NF
  • Range Fire Classification :
    Euroclass A1
  • Acoustic Performance : ESA 5
  • Percentage of Recycled Content : 99%
  • Recycling Information : Cast iron is fully recyclable through the existing recycling industrial network.
    Data source: Environmental Product Declaration S-P-02013

BIM

See our BIM Library