Expansion plug - DN 75 - PAM GLOBAL S
Code article : 176715
Description
Part of the range dedicated to infrastructure, the ITINERO expansion plugs enable you to cap the ends of pipes or fittings. Designed for surface water from bridges and tunnels, the cast iron fittings are coated with a thick grey powder epoxy layer and are fully recyclable. PAM Building cast iron SMU Plus range complies with European standard EN 877 and has remarkable fire protection performances.
Product variants
| Article | DN | dn | Angle | Length | Height | Width | Weight | 176715 | 80 | - | - | 90 | 71 | 90 | 0.6 |
|---|
All dimensions are in mm and nominal weights are in kg
Technical infos & product description
Product description
Part of the range dedicated to infrastructure, the ITINERO expansion plugs enable you to cap the ends of pipes or fittings. Designed for surface water from bridges and tunnels, the cast iron fittings are coated with a thick grey powder epoxy layer and are fully recyclable. PAM Building cast iron SMU Plus range complies with European standard EN 877 and has remarkable fire protection performances.
Recommended use :
- Above ground
- Domestic use
- Wastewater
- Rainwater
- Valve water
Technical infos
- Hot water resistance: 24h at 95°C.
- Thermal cycle resistance: 1500 cycles between 15°C and 93°C.
- Chemical resistance for 2 ≤ pH ≤ 12.
- Salt spray resistance internal coating: more than 350 h.
- Industry product standards : BS EN 877, DIN 19522, GEG RAL-GZ 698
- Range Fire Classification :
Euroclass A1
- Percentage of Recycled Content : 99%
- Recycling Information : Cast iron is fully recyclable through the existing recycling industrial network.
Data source: Environmental Product Declaration S-P-02013
