BLANK END - DN200 - PAM Global PLUS
Code article : 155287
Description
The Blank ends of the PAM Global PLUS range are used to temporarily or permanently seal the connections of pipes and fittings used on gravity drainage networks.These fittings are coated internally and externally with an anthracite grey polymerised epoxy film applied by powder coating (300μm on average).
Product variants
| Article | DN | dn | Angle | Length | Height | Width | Weight | 155287 | 200 | - | - | 210 | 60 | 210 | 3.2 |
|---|
All dimensions are in mm and nominal weights are in kg
Technical infos & product description
Product description
The Blank ends of the PAM Global PLUS range are used to temporarily or permanently seal the connections of pipes and fittings used on gravity drainage networks.These fittings are coated internally and externally with an anthracite grey polymerised epoxy film applied by powder coating (300μm on average).
Recommended use :
- Aggressive effluents
- Drainage systems in large kitchens, restaurants & canteens
- Chemical processing plants
- Laboratories of a non-industrial nature, e.g. in schools & in the health sector
- Hydrocarbon wastewater
- Slaughterhouses and meat-processing plants
Major benefits :
- Performances guaranteed with marks delivered by third party.
- Long lasting operational safety thanks to the robustness and stiffness (around 700kN.m) of cast iron and usage of flexible mechanical couplings.
- High level of fire safety with the excellent fire resistance up to 240 minutes according to configuration (mostly requires no special fire protection saving time and cost).
- Best acoustic comfort.
- Easiness of installation due to mechanical couplings assembled with simple tools.
Technical infos
- Hot water resistance : 24h at 95°C.
- Thermal cycle resistance: 1500 cycles between 15°C and 93°C.
- Chemical resistance for 2 ≤ pH ≤ 13, up to 80°C.
- Salt spray resistance : 1500h.
Coating description
Coating: grey RAL 7015, epoxy, average dry film thickness 300 μm.
- Material : Cast Iron
- Industry product standards : BS EN 877, DIN 19522, GEG RAL-GZ 698
- Range Fire Classification :
Euroclass A2-s1,d0
- Acoustic Performance : Lsc ≤ 10 dB(A) & LaA = 47 dB(A) according to EN 14366 with 2L/s.
- Percentage of Recycled Content : 99%
- Recycling Information : Cast iron is fully recyclable through the existing recycling industrial network.
Data source: Environmental Product Declaration S-P-02013
