G878 Half Round Bracket RW Classical Drive-in with Retaining Lip 100mm
Code article : 220706
Description
G878 Classical Rainwater Half Round Drive-in Bracket with Retaining Lip 100mm. Classical standard half round gutter galvanised drive-in bracket with retaining lip are part of a complete system that is attached to a roof of a house or building that collects and directs rainwater away from the roof and eaves into a vertical pipe discharge system.
Product variants
| Article | DN | dn | Angle | Length | Height | Width | Weight |
|---|---|---|---|---|---|---|---|
| 220706 | 100 | - | - | - | - | - | 0.3 |
| 220707 | 115 | - | - | - | - | - | 0.3 |
| 220708 | 125 | - | - | - | - | - | 0.3 |
All dimensions are in mm and nominal weights are in kg
Technical infos & product description
Product description
G878 Classical Rainwater Half Round Drive-in Bracket with Retaining Lip 100mm. Classical standard half round gutter galvanised drive-in bracket with retaining lip are part of a complete system that is attached to a roof of a house or building that collects and directs rainwater away from the roof and eaves into a vertical pipe discharge system.
Recommended use :
- Rainwater
- Runoff water
Major benefits :
The galvanised mild steel drive-in brackets with retaining lip support the weight of the gutter system horizontally by inserting the spike into the building brickwork. Used when the building has no fascia board fixing. The clip has a retaining lip to provide extra security of restraining the gutter. Guidance, 1 bracket every 900mm maximum with additional brackets to support fittings
Coating description
- Coating: Black water based primer to an average thickness of 70 microns.
- Material : Galvanized steel
- Industry product standards : BS 460
- Percentage of Recycled Content : 97%
- Recycling Information : Fully recyclable
