ED078 Puddle Flange Ensign Drain Multi-clamp 200mm
Code article : 191831
Description
Ensign drain cast iron compression puddle flanges used where pipes pass through external walls in basement areas. The one-piece flange for use with 200mm diameter pipework is slipped over the end of the pipe and then tightened up with a ratchet wrench.
Product variants
| Article | DN | dn | Angle | Length | Height | Width | Weight |
|---|---|---|---|---|---|---|---|
| 191831 | 200 | - | - | - | - | - | 6.3 |
All dimensions are in mm and nominal weights are in kg
Technical infos & product description
Product description
Ensign drain cast iron compression puddle flanges used where pipes pass through external walls in basement areas. The one-piece flange for use with 200mm diameter pipework is slipped over the end of the pipe and then tightened up with a ratchet wrench.
Recommended use :
- Aggressive effluents
- Domestic use
- Fat Wastewater
- Hot effluents
- Industrial Wastewater
- Rainwater
- Runoff water
Major benefits :
The gasket within the unit is compressed onto the pipe, therefore no Denso tape is required.
Technical infos
- Hot water resistance: 24h at 95°C
- Thermal cycle resistance: 1500 cycles between 15°C and 93°C
- Chemical resistance for 1 ≤ pH ≤ 13, up to 80°C
- Salt spray resistance internal coating : more than 1500h
- Salt spray resistance external coating : more than 1500h
Coating description
- External coating: Powder Epoxy Resin average dry film thickness 150 microns
- Internal coating: Powder Epoxy Resin average dry film thickness 150 microns
- Material : Cast Iron
- Industry product standards : BS EN 877
- Range Fire Classification :
Euroclass A2-s1,d0
- Percentage of Recycled Content : 97%
- Recycling Information : Virtually 100% Recyclable
