ED012 Inspection Chamber Ensign Drain 150mm x 150mm x 45°
Code article : 191834
Description
The Ensign drain cast iron inspection chambers facilitate access to the pipe system for rodding and clearing debris.
Product variants
| Article | DN | dn | Angle | Length | Height | Width | Weight |
|---|---|---|---|---|---|---|---|
| 191832 | 100 | - | - | - | - | - | 15.9 |
| 191833 | 150 | - | - | - | - | - | 17.2 |
| 191834 | 150 | - | - | - | - | - | 19.4 |
All dimensions are in mm and nominal weights are in kg
Technical infos & product description
Product description
The Ensign drain cast iron inspection chambers facilitate access to the pipe system for rodding and clearing debris.
Recommended use :
- Aggressive effluents
- Domestic use
- Fat Wastewater
- Hot effluents
- Industrial Wastewater
- Rainwater
- Runoff water
Major benefits :
The two branch arm entries are both at 45° conforming to BS EN 12056 part 4, and the body is fitted with a circular cast iron inspection lid and gasket seal to prevent odours escaping into the atmosphere. Where other angles of entry are necessary these can be achieved by the use of standard bends.
Technical infos
- Hot water resistance: 24h at 95°C
- Thermal cycle resistance: 1500 cycles between 15°C and 93°C
- Chemical resistance for 1 ≤ pH ≤ 13, up to 80°C
- Salt spray resistance internal coating : more than 1500h
- Salt spray resistance external coating : more than 1500h
Coating description
- External coating: Powder Epoxy Resin average dry film thickness 150 microns
- Internal coating: Powder Epoxy Resin average dry film thickness 150 microns
- Material : Cast Iron
- Industry product standards : BS EN 877
- Range Fire Classification :
Euroclass A2-s1,d0
- Percentage of Recycled Content : 97%
- Recycling Information : Virtually 100% Recyclable
