ED070 Blank End Ensign Drain 400mm
Code article : 265190
Description
The Ensign Drain cast iron Blank End enables you to have a dead end for situations such as a rodding point there is a full size range and can be used with all our couplings.
Product variants
| Article | DN | dn | Angle | Length | Height | Width | Weight |
|---|---|---|---|---|---|---|---|
| 191818 | 100 | - | - | 110 | 40 | 110 | 0.8 |
| 191819 | 150 | - | - | 160 | 50 | 160 | 1.7 |
| 191820 | 200 | - | - | 210 | 60 | 210 | 3.2 |
| 191887 | 250 | - | - | 274 | 70 | 274 | 5.9 |
| 191888 | 300 | - | - | 326 | 80 | 326 | 10 |
| 265190 | 400 | - | - | 429 | 98 | 429 | 21 |
All dimensions are in mm and nominal weights are in kg
Technical infos & product description
Product description
The Ensign Drain cast iron Blank End enables you to have a dead end for situations such as a rodding point there is a full size range and can be used with all our couplings.
Recommended use :
- Aggressive effluents
- Domestic use
- Fat Wastewater
- Hot effluents
- Industrial Wastewater
- Rainwater
- Runoff water
- High pressure
- Wastewater
Major benefits :
The Ensign plain cast iron blank ends when connected with a coupling, make it possible to temporarily or permanently cap the pipes or pipe fittings used on gravity drainage networks.
Technical infos
- Hot water resistance: 24h at 95°C
- Thermal cycle resistance: 1500 cycles between 15°C and 93°C
- Chemical resistance for 1 ≤ pH ≤ 13, up to 80°C
- Salt spray resistance internal coating : more than 1500h
- Salt spray resistance external coating : more than 1500h
Coating description
- External coating: Powder Epoxy Resin average dry film thickness 150 microns
- Internal coating: Powder Epoxy Resin average dry film thickness 150 microns
- Material : Cast Iron
- Industry product standards : BS EN 877
- Range Fire Classification :
Euroclass A2-s1,d0
- Percentage of Recycled Content : 97%
- Recycling Information : Virtually 100% Recyclable
