PAM RAPID S W2 EPDM - DN250
Code article : 228759
Description
Ensign soil stainless steel single piece, single bolt Rapid NG coupling assembled utilising a captive socket cap screw driven by a 6mm allen key and includes an EPDM gasket as standard. The cap screw is completely tightened leaving no gap and assembled in seconds.
Product variants
| Article | DN | dn | Angle | Length | Height | Width | Weight |
|---|---|---|---|---|---|---|---|
| 210424 | 50 | - | - | 70 | 80 | 42 | 0.1 |
| 210425 | 70 | - | - | 85 | 98 | 42 | 0.12 |
| 210427 | 100 | - | - | 125 | 139 | 48 | 0.18 |
| 210428 | 125 | - | - | 147 | 161 | 56 | 0.28 |
| 210429 | 150 | - | - | 172 | 187 | 56 | 0.32 |
| 210430 | 200 | - | - | 223 | 240 | 70 | 0.6 |
| 228759 | 250 | - | - | 290 | 315 | 95 | 1.1 |
| 228771 | 300 | - | - | 350 | 375 | 95 | 1.25 |
All dimensions are in mm and nominal weights are in kg
Technical infos & product description
Product description
Ensign soil stainless steel single piece, single bolt Rapid NG coupling assembled utilising a captive socket cap screw driven by a 6mm allen key and includes an EPDM gasket as standard. The cap screw is completely tightened leaving no gap and assembled in seconds.
Recommended use :
- Above ground
- Rainwater
- Domestic use
- Valve water
- Fat Wastewater
- Hot effluents
- Hydrocarbon Wastewater
- Runoff water
- Industrial Wastewater
Major benefits :
This coupling ensures a maximum hydrostatic accidental pressure of 5 bar when fully restrained and 0.5 bar (5 m of water head) unrestrained. The maximum angular deflection supported between two assembled elements is 3°.
Technical infos
- Hot water resistance: 24h at 95°C.
- Thermal cycle resistance: 1500 cycles between 15°C and 93°C.
- Chemical resistance for 2 ≤ pH ≤ 12.
- Salt spray resistance internal coating: more than 1500 h
- Material : Steel W2
- Industry product standards : BS EN 877, GEG RAL-GZ 698
- Recycling Information : Fully recyclable
